It turns out to be nearly perfect. The unit is very sturdy, was easy to put together, and the shelf height is just right. There’s enough clearance for airflow but not so much that you feel space is being wasted.

I used self-stick cable tie anchors and cable ties to mount the power bricks and used double-stick mounting tape as stops to keep things in place. The old-style minis are heavy enough and are pretty non-slip, so I just put some tape at the front of the shelf to keep them from sliding off. The one new-style mini was pretty slippery so I used the tape to actually stick the base to the shelf.

The unit came with vertical rods that go in the back of each column of shelves to keep them from sliding out the back, but I decided to leave those out. That way I can slide each shelf forward to get DVDs into the mini, or back to get at the connectors.

The weak spot of the minis is the power cord (at least on the pre-2010 models) which comes out quite easily. I tied those down as well and am pretty sure they won’t jiggle their way out. I have four minis in the rack right now along with a Drobo with 10TB of disk. I’m going to be adding a 5th mini with a stackable disk drive, that’s why there’s double-high slot  still open on the mini side of the rack.

Cable management is an issue, mostly because of the power bricks long cables. I may fiddle with how I fold the cables into the shelves a bit more.

The whole thing plus a UPS and monitor/keyboard/mouse sits nicely on some steel shelves in our A/V equipment room at the museum. I still need to time how long the UPS runs. I’m only going to have the public web site minis on it.

Generating the QR Code isn’t hard. Google’s Chart api can do it. Basically, anything you put fullowing the “chl=” part of the URL here will generate a code: http://chart.apis.google.com/chart?cht=qr&chs=350×350&chl=http://think.random-stuff.org/

We’ve set aside a specific URL space for our codes to send people to. Each link will first take you to a short URL which will then redirect you to the actual URL relevant to the exhibit. The advantage of this is that we can also put up short, “human readable” links on the exhibits.  That will let us track how often the links are getting used and what mobile devices people are using. We’ve also put an explanatory page at the top level of that space.

There was a little debate about how much we should try to explain QR Codes on the exhibit itself. You can see what we wound up with in the detail photo. Basically we’ve decided that visitors will either (a) recognize the code and know what to do with it, (b) not recognize it and skip over it, or (c) ask someone. The “c” people can be given a printout of the explanatory page.

We’ve decided to introduce the codes slowly and in a way that hopefully doesn’t get in the way of people who don’t know what they are or don’t choose to use them.

Another question was whether we should format the linked pages in a phone-friendly format. The easy answer (because it requires no additional resources…) was not to do that. Phones are getting pretty good at reading full-blown web pages.

For further reading, here’s a March 2009 article titled QR codes in the museum – problems and opportunities with extended object labels

What QR Code app am I using? Right now on my iPhone 3G, I’ve got Barcodes. It’s got a huge number of one-star, negative comments but it works for me. The critical thing you need to know is that it only works on QR Codes, not regular barcodes, and at least with the 3G, you have to take the photo from about 18″ away and then use the app to zoom it to the right size.

Initially it was a bust. I hooked it up to a monitor, turned it on, and it booted to a text login prompt. No nice multi-media GUI, nothing. Just login:

Googling around was no help. I couldn’t figure out how to make it start X Windows or anything. The OS that’s on there is called Red Flag Linux. It seemed to have everything it needed, but I don’t have enough Xorg fu to understand how it was supposed to figure out how to configure itself for the monitor I had.

It turns out that was a blessing in disguise. After a little more Googling, I found myself making a bootable USB stick with Ubuntu 9.10 on it. I wound up using the “From Linux” instructions from another Ubuntu box. I debated whether or not to use the netbook distro or the full desktop one. I picked the full one. It turned out to be the right choice.

I did mess with the B202’s BIOS a bit to figure out how to make it boot from the USB stick. I’m not sure whether any of that was strictly necessary, but I had changed a few things to try to get the original software running.

After that it was smooth sailing. Ubuntu booted right up, running from the USB stick. It helpfully presented the option of installing from the stick. Once I made sure it would be able to work with the ethernet and WiFi, I used the installer to reformat the drive and install Ubuntu.

Things went so well, I’m ordering another one. The first one’s going to run our projector. The next one’s going to act as a WiFi to ethernet connection sharing router.

This was my first experience with a LiveCD/LiveUSB/etc. linux. It’s probably unremarkable these days, but I’m impressed with how easy it was to do.

Update: I just got my 2nd Eee Box. This one came with Windows XP pre-installed. Here are the steps needed to install Ubuntu:

1. When it boots into ExpressGate, click the Exit icon, then hold down DEL to get into the BIOS setup
2. In BIOS->Tools: Disable ExpressGate, then hit ESC to exit
3. In BIOS->Boot->Hard Drives: hit + to make 1st drive = USB:SMI USB Disk
4. Plug in your Ubuntu USB stick
5. Hit F10 to save and exit

Now it will boot from the USB stick. At this point you can either boot into Ubuntu w/o installing (i.e. run from the stick) or install Ubuntu. If you’re unsure whether you want to go through with this before you try, then choose the first option. Note that it takes a longish time to boot from the stick.

Once it boots, you’ll see an icon in the upper left corner labeled “Install Ubuntu 9.10″. Double-click that to do an installation.

Before I ever install any updates on a server, I clone the disk with SuperDuper or CCC. That means I also have to first shut down all the services and pull the system off the net, clone the disk, boot the clone to make sure it’s ok, boot the normal disk, do the update, and test everything. Coupled with having to move the computers, 5 disk drives, and a D-Link switch, I didn’t have a fun few hours this morning.  I didn’t update the Leopard Server machine because I couldn’t get the alternate disk to boot. It turns out that the Iomega portable drive I was using (I love these little disks!) wasn’t getting enough power from the G5’s front connector and needed to be plugged in the back. By the time I figured that out, it was too late, the museum staff people were coming in and I had to have the server running again. So I’ll have to do the update another day.

Now one of the remote users on the updated Mini is having trouble getting in via ssh. So is it due to the move, the upgrade, or something completely unrelated? Having tried a bunch of things and looked at the log files, I’m leaning towards “something else”.

The one good thing that comes from this kind of thing is that you learn whether all the services are properly set up to start at boot time.

The panel discussion was about crime reporting in various media outlets, primarily print, radio, and TV. Tucker Carlson, Juan Williams, Martin Baron, Candy Altman, and Josh Silver were on the panel. 

There’s not too much of a technology angle to this event, other than that it’s nice to have people come in who know what they are doing. They brought in all their own equipment and a huge staff. Setup started yesterday, went into the wee hours of the night, and resumed again at 5AM this morning. 

The event was held in our Innovation Gallery, where exhibits are meant to come and go. Right now there’s relatively plenty of floor space but we’re going to be putting in a few new exhibits soon so things are going to get tighter again.

This one is hung in a box near the ceiling. It’s been running for over a year. We set them all to reboot after a power loss, so we almost never need access. When I do need to do anything to it, I grab a ladder and plug in a keyboard & mouse.

This one has also been running for about a year. Prior to that it was sitting in a server room for about two years. The enclosure gets a bit warm. We used to have a Shuttle XPC inside but it failed after about 4 months. I think it was the heat.

We have two display tables with baskets attached underneath. The Mini fits in the basket. We used to have two additional setups just like this. This photo is of the CityCar interactive exhibit. There’s another Mini at the other end of the floor in the MIT & the Sea interactive exhibit (below the Mini-in-a-box pictured above).

The latest one to be put into service is a Mini that we strapped to the top of a monster Panasonic projector. The Mini drives the smaller projector to the left in the photo. This Mini is running Vine Server so I can access it remotely. Once we’re done tweaking it, I’ll probably shut off the Vine access.

Our Admissions Desk also uses two Minis, one for the staff to access various admin tools, mail, etc. The other to drive a sign displaying admissions prices, welcoming groups, etc.

In January we’re going to be installing an exhibit developed by the Sociable Media Group at the Media Lab. So far it will have seven Mac Minis in it, as well as an iMac. There will also be a couple of Dells so I guess we’ll see how they hold up in comparison.

My wishlist for the Mini: Keep being ultra-stable, don’t get too heat sensitive. Faster graphics would be nice, but not at the expense of being more finicky.

PS – I have one in my basement at home as well, it’s running this blog, among other things. I think it’s about 3 years old. I have it on a small UPS to deal with short power outages, connected to the web via Verizon FiOS (also very reliable!).

The basic requirements were to let visitors browse a single website (http://webmuseum.mit.edu) but not to be able to follow any of the outgoing links. Additionally, the visitors should not be able to leave the web browser and start mucking about with the underlying computer.

Even though our old PowerMac G4’s are dropping like flies with broken power supply units, we have two left in the “good enough to reuse” bin. So I set one up with Mac OS X 10.5. Using MacPorts, I installed Squid and set up the network to use that squid as a proxy. Squid lets you configure which URLs it will go out and get, and which ones it will return an error on. I set it up to only return pages in the webmuseum.mit.edu site, and whenever a link outside that site is requested, it returns the toplevel page at http://webmuseum.mit.edu.

So far so good. The next thing I needed was a browser that won’t let visitors do too much other than browse. Luckily last week I bumped into Plainview. Plainview is a webkit based browser with no chrome. It also happens to have a kiosk mode that requires a password to get out of.

Then I set up a user account with Parental Controls, and only allow it to run the Plainview app and nothing else. I have the Mac boot up with that user login coming up automatically, and Plainview starts as a login application. Presto, a nice web kiosk. If users break out of Plainview, they can’t do anything else but log out of the system. We’ll see how long that takes…

One minor hitch in the entire setup – I don’t know whether it’s possible to set up Plainview to go directly into kiosk mode. Right now you have to type ⌘-/ and enter an administrator password to start kiosk mode.

MIT has its own video gateway site that links to three major MIT video repositories: TechTV, where the community can upload videos; MITWorld, videos of lectures and events at MIT; and MITOpenCourseWare, videos of classroom lectures.

But the fact remains that someone has to produce the videos. So far, iMovie and its cousins have done a lot to bring video production to a huge base of people, but I would wager that a large percentage of the storytelling being done with those tools is from the point of view of a single voice.

However, Wikimedia and Kaltura have teamed up to start a site where multiple people can collaborate on video production. (Seen at boingboing). Overall, a very cool idea with a lot of promise!

Instead I ordered a MacBook from the Apple Education for MIT site (they are about $100 less there, and there’s a savings on AppleCare). When it gets here in a few days, I’ll clone my MacBook Pro’s hard drive to the MacBook and send the MBP to my son. They only thing I’ll miss, I suspect is the lighted keyboard, something I’ve come to like a lot. I ordered the 250GB drive and I’ll shop around for a RAM upgrade.

Then, with the savings, I’m thinking pretty seriously about an iPhone, something that would be fun to play with for the Museum Without Walls.

The iPhones I looked at at the Apple store had the new location detection firmware. The store is here but the phone indicated it was a good 1000′ southeast of the store, south of what’s labeled Holyhood Cemetery. That’s not exactly pinpoint accuracy. But the Skyhook wifi database may not have included the mall, and thus the iPhone was probably using the Google cell-tower locations to find itself. Skyhook claims 10-20m accuracy in urban areas. That sounds pretty reasonable to me.

Along with the switch to WordPress, I’m going to expand from mostly geo-related topics to things I’m dealing with at MIT as well. So for those of you who want exclusively geo-news, link to the geo category and the geo feed in Atom, RSS, or RSS2.

I still have to switch over the Feedburner feeds and tweak a few more bits and pieces, but overall the new version is ready to go.

As I mention in the About page, I’ve kept the old blog intact so that all the permalinks still work.